WEIZHI:HOME >> Tape
Application:
Used for electrical stress control of cable terminal and intermediate joint under 35KV.
According to the specific installation requirements, the HB1220 electrical stress control belt should be correctly wrapped on the cable shield terminal. Generally, it is wrapped in an overlapping way, with the silver-gray side facing outwards.
It is necessary to ensure that the tensile rate does not exceed 10%. After wrapping the bag, squeeze the tape wrapping place by hand to make it stick tightly.
Technical Specification:
Property |
Testing method |
Typical data |
Tensile strength |
ASTM D 2671 |
10MPa |
Elongation at break |
ASTM D 2671 |
400% |
Dielectric strength |
IEC 243 |
21kV/mm |
Dielectric constant |
IEC 250 |
18 |
copyright:CAS Applied Chemistry Materials Co.,LTD. SUPPORT:JUDING TECHNOLOGY
TEL:+86 15304463105 FAX:
ADD: No.899 Road Yueda High-new Technology Develop Zone Changchun City JL Province,China